Text only | Text with Images

Alembic Guitars

Alembic products => Owning an Alembic => Troubleshooting => Topic started by: elwoodblue on February 12, 2011, 10:32:52 AM

Title: Screw size for control cover
Post by: elwoodblue on February 12, 2011, 10:32:52 AM
I'm working on bringing my '78 guitar back to life, and the screws for the back control cavity cover have gone MIA.  
 
  What size should I look for (so I don't have to bring the guitar into the hardware store) ?
 
thanks all,
Title: Screw size for control cover
Post by: jon_jackson on February 12, 2011, 02:59:42 PM
Current size is 2-56 (NC) x 3/8.  Not sure if they have changed sizes over the years.
Title: Screw size for control cover
Post by: mica on February 14, 2011, 11:57:49 AM
Do you have threaded inserts or not?
Title: Screw size for control cover
Post by: elwoodblue on February 14, 2011, 12:26:11 PM
Yes I have the brass threaded inserts,
they look the same as the inserts on my '82 exploiter (which also has some lost screws).
 Thanks Jon and Mica,
Title: Re: Screw size for control cover
Post by: dela217 on November 29, 2020, 06:31:54 AM
Whoops wrong thread.
Title: Re: Screw size for control cover
Post by: edwardofhuncote on November 29, 2020, 08:07:20 AM
I like any thread about that guitar... I think Bro. Elwood should post a pictorial update on ol' Eleven-Hundred.  ;D
Title: Re: Screw size for control cover
Post by: elwoodblue on November 29, 2020, 01:01:48 PM
 ;)
I like that idea too.


(adding to to-do list)
Text only | Text with Images