Print Page - Chip in pickup plastic

Title: Chip in pickup plastic
Post by: rv_bass on June 30, 2016, 06:02:31 PM

Would a chip in the pickup cover plastic exposing a little bit of magnet (or whatever is directly under the plastic) cause issues with pickup function or excess noise?

Title: Re: Chip in pickup plastic
Post by: rv_bass on July 01, 2016, 03:47:30 AM

I ask this because I saw a bass for sale with such a chip in the pickup plastic and was wondering if that would cause any noise issues. Thanks.

Title: Re: Chip in pickup plastic
Post by: FC Bass on July 01, 2016, 06:47:11 AM

I think the first thing you should see is the copper shielding foil, I guess its not good if you can see the magnet...

Title: Re: Chip in pickup plastic
Post by: FC Bass on July 01, 2016, 06:50:24 AM

On the Alembic Instagram page there's a picture of the pickups before they're casted in the shell, scroll down a long way to find it: https://www.instagram.com/alembicguitars/

Title: Re: Chip in pickup plastic
Post by: edwardofhuncote on July 01, 2016, 08:38:37 AM

I was able to repair a size ablechip in the ear of an AXY pickup (on my Distillate) using some blackened DevCon epoxy. I would guess if the copper shielding is okay, you're good - at least for noise.

Title: Re: Chip in pickup plastic
Post by: rv_bass on July 01, 2016, 05:13:08 PM

Thanks very much for the replies and links. I think I'm going to pass on this one.

Alembic Guitars

Alembic products => Owning an Alembic => Troubleshooting => Topic started by: rv_bass on June 30, 2016, 06:02:31 PM