Text only | Text with Images

Alembic Guitars

Alembic products => Owning an Alembic => Troubleshooting => Topic started by: japhy4529 on May 17, 2018, 12:15:37 PM

Title: Allen Wrench Tool for '90 Elan 5
Post by: japhy4529 on May 17, 2018, 12:15:37 PM
Hello,


Do I need to special order an allen wrench tool for the truss rod in my '90 Elan 5 or can I use a regular one (and if so, is it metric or standard)?


Thanks,
Tom
Title: Re: Allen Wrench Tool for '90 Elan 5
Post by: adriaan on May 17, 2018, 12:34:04 PM
For us metric folk, metric IS standard. ;D


But you'll need a 1/4 inch one.
Title: Re: Allen Wrench Tool for '90 Elan 5
Post by: StephenR on May 17, 2018, 12:37:52 PM
Might be a good thread to point folks in the direction of the Tools "sticky" in the FAQ section of the club.

http://club.alembicguitars.net/index.php?topic=200.0
Title: Re: Allen Wrench Tool for '90 Elan 5
Post by: japhy4529 on May 17, 2018, 02:52:05 PM
Quote from: adriaan on May 17, 2018, 12:34:04 PM
For us metric folk, metric IS standard. ;D


But you'll need a 1/4 inch one.

Haha Point taken. Thanks for the information.
Text only | Text with Images