In setup, nearing shipping:  

 

thanks for all the updated pics, mica!  they all look amazing!

Cool bass!!

That is sick.  Great wood choices.

Yo, Adam! Funny thing happened when installing your tuners:
 

 
The machine heads have a large screw on the inside edge that prevents them from being installed at a 90 degree angle to the neck. The heads bump eachother before we can rotate them straight across. We can either:
 
1. Leave it tilted as shown
2. Find some flathead screws and make them be straight across
 
Figured since we haven't drilled the anchor hole yet, might as well be your choice. Let me know what you prefer.

Hi Mica.
If option 2 is possible (find flathead screws), i would like to go with that.
Thanks!
Adam

We're working on it now. There's a small nylon washer under the screw that we're shaving down a little, and we may slightly knock the domed part of the screw down. This get them very nearly straight - you might not even notice the minor deflection.  
 
BTW, would you like a silver logo on this? I think it would look better with the tuner finish.

i would like to stick with brass logo no script (old school).  unless you think that it just will not look right at all.  thanks!

Bronze is good, James will install it in the morning.

Pardon my ignorance, but how is the tailpiece shaped? Maybe it is just the picture but it looks like it is a 45 degree angle? Anyway that is a beautiful bass!

Looks like a regular bar tailpiece to me, but I could be wrong.

Despite the optical illusion of the 2-D pix, Alembics tailpieces tend to slope down in the front (i.e., the edge facing the bridge) like a wedge. For example, the famous Alembic bird tailpiece, which would appear in photos for all intensive purposes to be level and flat (when looked at from above in plan view), is actually a wedge in cross-sectional view (i.e., when viewed from the side)