Short Scale Action

Started by rustyg61, August 17, 2013, 07:21:40 PM

Previous topic - Next topic

jazzyvee

I need to read this thread a few times...... anyone got some paracetamol?  :-)
 
Jazzyvee
The sound of Alembic is medicine for the soul!
http://www.alembic.com/info/fc_ktwins.html

that_sustain

There's a loophole in the debate, with the neck angle thing.

rustyg61

OK, after much twisting & shouting, I made my action better! Now instead of a .02 difference in the action on the G string at the 12th & 24th fret there is a .005 difference & I was able to lower my E string from a .08 to a .07 & G string from a .07 to a .065. So I have lower action & it is more consistent above the 12th fret. I really cant say what fixed it other than I tried tightening the truss nuts adding more backbow which didn't help, then loosened them all the way & pressed down on the neck slightly to give me more relief, then snugged the nuts & went 1/4 turn more. After all that I set my action back where it was at a .07 on the G & .08 on the E & had no buzz so I lowered both until they buzzed then raised the bridge 1/4 turn. Now it's all good! I know that was unorthodox going to both extremes on the truss rod, but it worked!
 
Thanks so much for all your comments & to Keith H for the phone call & personal insight on your short scale basses! It's great being a part of such a supportive community!
Rusty
2011 SCSD
2014 "Blue Orca" Series II Europa
http://www.alembic.com/info/fc_blueorca.html

oddmetersam

Thanks for all the help, guys! And sorry if I was the cause of a loophole....

rustyg61

Rusty
2011 SCSD
2014 "Blue Orca" Series II Europa
http://www.alembic.com/info/fc_blueorca.html